Aficio 2404WD Operating Instructions Manual Download

Page: 36 / 92

Troubleshooting When Using the Printer Function

When a Message Appears

This section describes the principal messages that appear on the panel display.
If a message not described here appears, act according to the message.

Note

❒

Before turning the main power off, see “Turning On the Power”, About This
Machine.

Reference

“Turning On the Power”, About This Machine

Status Messages

This section describes the machine status messages.

Message

Status

Ready

This is the default ready message. The machine is ready
for use. No action is required.

Waiting...

The machine is waiting for the next data to print. Wait a
while.

Offline

The machine is offline. To start printing, switch the ma-
chine online by pressing

[

Online

]

Please wait.

This message might appear for a second or two while the
machine is preparing, performing initial adjustments, or
adding toner. Wait a while.

Job Suspended...

All jobs in the machine are suspended. Wait a while.

Hex Dump Mode

In the Hex Dump mode, the machine receives data in
hexadecimal format. Turn off the machine after printing,
and then turn back on.

Resetting job...

The machine is resetting the print job. Wait until
“

Ready

” appears on the display panel.

Setting change...

The machine is setting changing. You cannot use the con-
trol panel while this message is displayed. Wait a while.

Summary of Contents for 2404WD





























































































Search results

Summary of Contents for 2404WD

Reviews:

Related manuals for 2404WD

Brands by name

Popular brands

Aficio 2404WD, Operating Instructions Manual

Search results

Summary of Contents for 2404WD

Reviews:

Related manuals for 2404WD

Brands by name

Popular brands