Page
9
Fig. 1
Fig. 2
BASE ASSEMBLY
1.
Assemble the base to the body frame by Bolt M14*40(03), Washer
1
4(04) and Lock Washer
14(05). (refer to fig 1)
2
.
Fix the 4pcs supports (35) to the body frame part B and C by using BoltM14*40(03), Washer
14 (04),Lock washer
14
(05)and Nut M14(06) .(refer to fig.2)
PRESSURE GAUGE ASSEMBLY
1
.
Take off the plunger from Oil hose(16), pay attention to the O-ring should keep in Oil hose(16)
2
.
Screw out the Nut(77)from Pressure gauge(81)
3
.
Tighten the Pressure gauge(81) to the Frame(90) by using Nut(77)
4
.
Tighten the Oil Hose(16)and Pressure Gauge(81)
(Refer to Fig.3)
Fig. 3