Page
7
Installation
The machine must only be installed and commissioned by qualified personnel!
All relevant safety regulations must be strictly adhered to!
Prior to First Use
•
Before the first use, fix the machine to the floor by anchor bol
t.
Ensure the standing surface of the machine
site is firm and horizontal, and that sufficient lighting is provided.
•
Clean the machine thoroughly. Before first use of this product, pour a teaspoon of good quality, air tool
lubricant into the air supply inlet of the lift control valve, connect to air supply and operate for 3 seconds to
evenly distribute lubricant.
This press is shipped with a Pressing Adapter Set, which includes various size and capacity Pressing Adapters
– EACH ADAPTER HAS A MAXIMUM CAPACITY BASED ON ITS SIZE
– DO NOT USE ADAPTER BEYOND RATED CAPACITY.
IMPORTANT
This press is shipped with a removable guard, determine if the included guard is appropriate for the
application, due to the wide variety of pressing / bending applications, it is impossible to incorporate one
guard that will apply to all applications. ALWAYS ENSURE THAT THE OPERATOR AND BYSTANDERS ARE
PROPERLY GUARDED FROM THE POSSIBILITY OF FLYING DEBRIS.