Afag WV 630-1, Translation Of Operating And Installation Instructions

Page: 19 / 21

R01.0 16/05/2019 Page 19
6 Accessories
6.1 Mounting parts
Table 4: Order data
Type Designation Order number
6.2 Control device
The WV is connected to the 230V/50Hz AC system via an IRG or MSG controller and can
be rated for other mains voltages and frequencies, e.g. 115V/60Hz. They operate in full-
wave mode at double mains frequency, i.e. at 50Hz AC, with a vibration frequency of
100Hz, in half-wave mode at single mains frequency with a vibration frequency of 50Hz.
Vibration displacement and thus the transport speeds are infinitely adjustable due to mag-
net current and thus magnetic force variability.
Soft-starting, all IRG and MSG types can be mounted in various different ways and offer
extra controls for photoelectric barriers, initiator elements, or extern 24VDC signal. For a
detailed description of the controllers refer full-range catalogue from AFAG GmbH.
Third-party controllers can also be used as long as they meet the technical requirements.
Table 5: Controllers for WV- Bowl feeder
Type Power supply Order number Comments
IRG1-S
230V/50Hz 50360105
Control with no timer function
External target value preset
115V/60Hz 50360106
MSG801
230V/50Hz
–
115V/60Hz
50391818
With timer function, valve and inter-
face outputs, sensor feed
MSG802
230V/50Hz
–
115V/60Hz
50391819 With sensor feed