Afag SREH-50-IOL, Assembly And Operating Instructions Manual

Page: 12 / 52

Safety instructions
12 – 52 Assembly instructions EN

SREH-50-IOL

Date 17.06.2022

Version 1.0
2.8 General hazards / residual risks
Despite the safe design of the machine and the technical protective measures
taken, there still remain residual risks that cannot be avoided and which present
a non-obvious residual risk when operating the modules.
Observe the safety instructions in this chapter and in the other sections of this
manual to avoid damage to property and dangerous situations for the personnel.
2.8.1 General hazards at the workplace
The smart rotary module has been built according to the state-of-the-art and the
applicable health and safety requirements. However, improper use of the
module may cause the following hazards to the personnel:

Danger to life and limb of the operator or third parties,

on the smart rotary modules themselves,

property damage.
Always keep the assembly instructions ready at hand at the workplace!
Please, also observe:

the general and local regulations on accident prevention and environmental
protection,

the safety information sheet for module.
WARNING
Danger - Do not use in unsuitable environment!
The smart rotary module is designed for use in non -explosive atmospheres.

Do not use the modules in potentially explosive atmospheres!
CAUTION
Risk of injury from being caught!
Rotative movements of the module can catch pieces of clothing, hair or
materials and injure people.

Maintenance and care should only be carried out by qualified personnel.

Wear personal protective equipment!
CAUTION
Risk of injuries due to uncontrolled parts movements!
When connecting and operating the module, unexpected movements can
cause personal injury or damage to property.

Only qualified personnel may work with or on the module.