manualshive.com logo in svg

Afag EPS giga YZ, Operating Manual

Get your hands on the comprehensive Operating Manual for the cutting-edge Afag EPS giga YZ. Gain valuable insights and unlock the full potential of this innovative product. Download the manual for free at manualshive.com, ensuring a seamless user experience and hassle-free access to all the crucial information you need.

Share
Download
background image

 
 

 

Subject to change.   

 

 

 

 

 

6 

 

 

 

Vers. 1.1 en 01.01.2019 

Afag Hardt GmbH – Gewerbestraße 11 - 78739 Hardt - Phone:07422/56003-0 
Company headquarters: 78739 Hardt, Managing Director: Walter Kunz, HRB 480966 Stuttgart

 

 

4  Product description 

  Intended use 

The pick and place EPS devices are used in automation systems and are intended exclusively for 
moving workpieces. 
 
The pneumatic modules are intended exclusively for operation with compressed air (4-7 bar). Use for 
any other purpose does not constitute an intended use. 
 
The electric axes are intended exclusively for operation with original LinMot components (controllers, 
cables...). Use for any other purpose does not constitute an intended use. 
 
The intended use also includes compliance with the prescribed installation and removal instructions, 
the service and maintenance conditions and observance of the specifications in the data sheets. 
 

  Warranty and liability 

The "General Conditions of Sale and Delivery" of Afag GmbH shall apply in all cases.  

 
The term of the warranty on Afag handling components and systems is: 

  24 months following commissioning, butnot exceeding 27 months following delivery.  

  Wear parts (e.g. shock absorbers) are excluded from the warranty. * 

 
The guarantee covers the use or repair of defective Afag parts. No further claims will be 
accepted. 
 
The warranty will be voided in event of the following: 

  Use for other than the intended purpose 

  Failure to observe the information on installation, commissioning, operation and 

maintenance in the operating manual 

  Improper installation, commissioning, operation and maintenance 

  Independent repairs and constructional changes without prior instruction by Afag 

Automation AG/Afag Hardt GmbH 

  Removal of the serial number on the product 

  Using the module without shock absorbers, or with defective shock absorbers 

  Inadequate monitoring of wear parts 

  Failure to observe the EC Machinery Directive, accident prevention regulations, VDE 

guidelines as well as the safety/installation instructions 

  Emergencies caused by external influence or force majeure. 

 
*A customer has the right to a defect-free product. This is also applicable for accessories and 
wear parts, if they are defective.  
 

Summary of Contents for EPS giga YZ
















































Reviews:

No comments

Related manuals for EPS giga YZ

Oemtools 24950 Operating Instructions And Parts Manual preview
24950
Brand: Oemtools Pages: 4
ICS ELECTRONICS 4803 Quick Start Manual preview
4803
Brand: ICS ELECTRONICS Pages: 6
FJC 45135 User Manual preview
45135
Brand: FJC Pages: 2
Califone WT1 User Manual preview
WT1
Brand: Califone Pages: 7
CALITEK Grizzly 600 Manual preview
Grizzly 600
Brand: CALITEK Pages: 16
LAHTI PRO 46033 User Manual preview
46033
Brand: LAHTI PRO Pages: 20
LAHTI PRO 46017 User Manual preview
46017
Brand: LAHTI PRO Pages: 16
J&M 32 Series Operator'S Manual preview
32 Series
Brand: J&M Pages: 53
Qazqa 46060 Instruction Manual preview
46060
Brand: Qazqa Pages: 2
Varian Saturn 2000 GC/MS Pre-Installation Instructions preview
Saturn 2000 GC/MS
Brand: Varian Pages: 9
Masterclock CS5-LAN User Manual preview
CS5-LAN
Brand: Masterclock Pages: 19
Summit SUM-905223 Operation Manual preview
SUM-905223
Brand: Summit Pages: 3
WPG TL3AM Instructions preview
TL3AM
Brand: WPG Pages: 4
DD Compound Vac Checker Instruction Manual preview
Vac Checker
Brand: DD Compound Pages: 18
Magicfx STAGE SHOT II User And Installation Manual preview
STAGE SHOT II
Brand: Magicfx Pages: 32
chinavasion CVVO-H64-2GEN Instruction Manual preview
CVVO-H64-2GEN
Brand: chinavasion Pages: 2
Keeler KineXis Instructions For Use Manual preview
KineXis
Brand: Keeler Pages: 12
Modular 65/40 GR Operating Instructions Manual preview
65/40 GR
Brand: Modular Pages: 7

Brands by name

Popular brands

Load more brands