Maintenance and repair
Assembly instructions
DE
EPS Handling systems
Date 08.09.2021
Version 2.0
101–112
8.3 Maintenance activities and maintenance intervals
Observe the specified maintenance and care intervals. The intervals refer
to a normal operating environment.
If the system is to be operated in an environment with abrasive dusts or
corrosive or aggressive vapours, gases or liquids, the approval of Afag must
be obtained in advance.
8.3.1 Overview of the maintenance points
Fig. 26
Maintenance EPS systems (exemplary representation)
No. Maintenance point
Maintenance work
Interval
System
[On/Off] Remarks
1.
EPS handling system Cleaning and
checking
As required
[Off]
-
Clean the servo gripper with a dry, lint-free cloth.
- Do not spray the EPS with water, do not use
aggressive cleaning agents.
- Carry out a visual inspection of the EPS system.
2.
Pneumatic cylinder
weight compensation
(if installed)
Check
As required
[Off]
-
2.
Pneumatic cylinder
If a pneumatic cylinder is used as a weight compensation,
check it for leakage once a year.
8.3.2 Further maintenance
Further maintenance is not required, if the ambient conditions listed below are
complied with:
Clean working area
No use of splash water
No abrasion or process dusts
Environmental conditions as specified in the technical data
