Maintenance and Repair
34 – 40
Assembly instructions EN
SG-50
Edition 01/2021
Rev. 2.0
9.3.1 Overview of the maintenance points
Fig. 13
Servo gripper maintenance points SG-50
No. Maintenance point
Maintenance work
Interval
System
[On/Off] Remarks
1
Servo gripper module Cleaning and
checking
As required
[Off]
-
Clean the servo gripper with a dry, lint-free cloth.
- Do not spray the module with water, do not use
aggressive cleaning agents.
- Perform a visual inspection of the servo gripper.
9.3.2 Further maintenance
Further maintenance is not required, if the ambient conditions listed below are
complied with:
Clean working area
No use of splash water
No abrasion or process dusts
Environmental conditions as specified in the technical data
9.4 Spare parts and repair work
Afag Automation AG offers a reliable repair service. Defective servo grippers
can be sent to AFAG for warranty repair within the warranty period.
Damaged servo grippers may only be replaced or repaired by Afag
Automation AFAG! No spare parts are available for the servo grippers.
CAUTION
Danger of injury when dismounting the servo gripper!
When disassembling the servo grippers from a system, there is a danger of
uncontrolled movements.
Only remove the servo gripper when the control unit is switched off and
secured!
Only remove the servo gripper when the control unit is switched off and
secured!
