Safety instructions
12 – 40
Assembly instructions EN
SG-50
Edition 01/2021
Rev. 2.0
2.8 General hazards / residual risks
Despite the safe design of the servo gripper and the technical protective
measures taken, there still remain residual risks that cannot be avoided and
which present a non-obvious residual risk when operating the servo gripper.
Observe the safety instructions in this chapter and in the other sections of this
manual to avoid damage to property and dangerous situations for the personnel.
2.8.1 General hazards at the workplace
The servo gripper has been built according to the state-of-the-art and the
applicable health and safety requirements. However, improper use of the servo
gripper may cause the following hazards to the personnel:
danger to life and limb of the operator or third parties,
on the servo grippers themselves,
property damage.
Always keep the assembly instructions ready at hand at the workplace!
Please, also observe:
the general and local regulations on accident prevention and environmental
protection,
the safety information sheet for the servo gripper.
WARNING
Danger - Do not use in unsuitable environment!
The servo grippers are designed for use in
non
explosive atmospheres.
Do
not
use the servo gripper in potentially explosive atmospheres!
CAUTION
Risk of injuries due to uncontrolled parts movements!
When operating the servo gripper uncontrolled movements may occur which
can cause personal injury or property damage.
Only qualified personnel may work with or on the servo gripper.
Read the assembly instructions carefully before carrying out any work on
or with the servo gripper.
