R02.1
07/01/2021
Page 25
Inverting the control signal (herein input E6)
Origin display.
Push the button.
Push the button.
Code input is expected
Push the button.
Push the button.
Push the button.
Push the button.
Dot appears in second LED. Program mode is active.
The value can be changed by the value keys.
The Control signal is converted to NO. LO signal at the
input E6 is further processed as HI signal.
Push the button.
It appears briefly, that the changes were saved.
After 20 seconds without pressing a button, the programming mode is exited and
the origin is displayed without a point.
