R02.1
07/01/2021
Page 13
4
Operating instructions
-
Before switching on, check that the controller has been correctly connected to
the oscillation conveyor.
-
Switch the frequency controller on with a mains switch.
-
If required, set the setpoint value until the vibration conveyor achieves the re-
quired output.
Conventions
The Documentation describes how you can do the feeding also with the keyboard.
This Documentation uses the following conventions:
Tabelle 2:
Conventions
Convention
Meaning
LO
defines the logical level for the controller at the inputs.
The condition 0 is with it fixed
HI
defined the logical level for the controller at the inputs.
The condition 1 is with it fixed
Keyboard and Display
Figure 3:
Keyboard and Display
