16xFE PoE+2xCombo GbE
EXPoE Switch
100-240VAC
Power socket
Grounding screw
1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use CAT5 or 6 UTP/STP cables.
4. AC input (100~240V/AC, 50~60Hz, 5A)
C11-162-30-250 PoE Switch
Quick Installation Guide
The C11-162-30-250 is a 16 port 10/100BaseT unmanaged PoE switch capable of feeding 15.4/30W (54V max. per port)
power to Power over Ethernet (PoE) devices. It comes with an addition of 2 GbE combo ports.
IMPORTANT
:
INTRODUCTION
CONNECTION
* 1x PoE switch
* 1x Quick Installation Guide
* 2x rack mount ears
* 1x power cord (type by the shipped-to area)
PACKAGE CONTENTS
Front Panel
Rear Panel
16xFE PoE+2xCombo GbE
EXPoE Switch
EX ON
Ports 1 ~ 8 up to 250m PoE distance.
When enabled, each port is isolated, but
is linked to the uplink ports.
EX OFF
Normal communication for ports 1 ~ 18
• EX mode in 802.3af(15.4): camera connection up to
250m@10Mbps via EXPoE ports
• EX mode in 802.3at(24W): camera connection up
to 200m@10Mbps via EXPoE ports
Restart the switch after changing the Extensive
mode.
EX mode DIP switch
The switch already comes with lightning protection mechanism. You can also gorund the
switch. through the PE (Protecting Earth) cable of AC cord or with Ground Cable.
