ARMOTECH
Rev 02.00
Pag. 11 di 24
©| Aerservice Equipments S.r.l. | 2021 all rights reserved
è vietata la riproduzione del presente manuale, anche parziale.
ASSEMBLY OF THE ARM ARMOTECH
Par
Description
1
Assembly
The arm is packed inside n ° 4 cardboard boxes:
1. Rotating base unit
2. Lever (for wall arm version)
3. Articulated arm assembly incl. aluminium tubes and PVC sleeves
4. Suction hood incl. bolts
1
2
–
open the box with the rotating base and check
that the hardware kit, the rotating base unit, the
flexible hose and the 3 pre-assembled screws are
present.
3
–
use the screws of the bag to connect the
rotating flange of the rotating base unit to the
lower flange of the wall bracket.
In this phase, lubricate the internal part of the r
rotating base unit with grease.
4
–
ensure that all M8 screws are tightened fix.
5
–
open the box of the lever and check that the
hardware kit and the lever are present.
6
–
use the pre-assembled screws on the rotating
base unit to secure the lever on it.
Be sure to tighten all three screws.
1
4
3
2
