Ndrive QL Hardware Manual
Installation and Configuration
Chapter 2: Installation and Configuration
This section describes the minimum hardware installation and configuration requirements for the Ndrive QL.
This installation will provide information on AC power connections and motor wiring.
D A N G E R : To minimize the possibility of bodily injury or death, disconnect all electrical
power prior to performing any maintenance or making adjustments to the equipment.
2.1. Unpacking the Chassis
D A N G E R : All electronic equipment and instrumentation are wrapped in antistatic material
and packaged with desiccant. Ensure that the antistatic material is not damaged during
unpacking.
Visually inspect the container of the QL for any evidence of shipping damage. If any such damage exists,
notify the shipping carrier immediately.
Remove the packing list from the QL container. Make sure that all the items specified on the packing list are
contained within the package.
All of the documentation provided with the QL should be saved for future reference. Additional information
about the QL system is provided on the Serial and Power labels that are placed on the QL chassis.
The system serial number label contains important information such as the:
l
Customer order number (please provide this number when requesting product support)
l
Drawing number
l
System part number
www.aerotech.com
Chapter 2
19
