Maintenance
MPS50SL Hardware Manual
MPS50SL-050 Bearing Centering
Drive the stage to the center of travel and disconnect power to the system. Insert the MPS50SL-050 bearing
centering fixture next to the bearing that requires adjustment. Manually push the bearing cage toward the
stage carriage until the fixture bottoms out against the carriage-side bearing rail to ensure proper cage
centering. Verify cage position against scribe marks in the base. A tapped hole in the fixture (M3 thread) is
provided to aid in removal of the fixture.
Figure 4-4:
MPS50SL-050 Bearing Cage Centering
Figure 4-5:
BCF-MPS50SL-050 Bearing Centering Fixture
42
Chapter 4
www.aerotech.com
