MPS50SL Hardware Manual
Overview
Chapter 1: Overview
N O T E :
Aerotech continually improves its product offerings; listed options may be superseded at any
time. All drawings and illustrations are for reference only and were complete and accurate as of this
manual’s release. Refer to www.aerotech.com for the most up-to-date information.
Table 1-1:
Model Numbers and Ordering Options
MPS50SL Miniature Mechanical-Bearing Screw-Driven Linear Stage
Travel (Required)
-025
25 mm travel
-050
50 mm travel
Drive Screw (Required)
-BS
Precision-ground ball screw, 1 mm/rev
-LS
Precision-ground lead screw, 0.5 mm/rev
Vacuum Preparation (Optional)
-HV
High-vacuum preparation to 10
-6
torr
Motor (Required)
-M1
DC servomotor
-M2
Stepper motor
Mounting Plate (Optional)
-MP
Optical table mounting plate
Metrology (Required)
-PL0
No metrology performance plots
-PL1
Metrology, Uncalibrated with performance plots
-PL2
Metrology, Calibrated (HALAR) with performance plots
Accessories (To be Ordered as a Separate Line Item)
HDZ-MPS50SL
Right-angle bracket
HDZ-MPS50SL-HV
Right-angle bracket, high-vacuum preparation to 10
-6
torr
www.aerotech.com
Chapter 1
11
