1.2.3. DIN Rail Mounting
A DIN rail can only be used with the -2P1 or -4P1 options.
DIN Rail Mounting Procedure:
1. Mount the DIN rail clip to the iXI4/XI4. The clip and #6-32 x 1/4 flat head screws are included in
the DIN rail clip kit.
2. Cut the DIN rail so one complete mounting hole extends beyond the last component at each end.
3. Secure the DIN Rail to the mounting surface with #10-32 screws spaced every six inches.
NOTE: Do not install the DIN rail to the mounting surface with the components already attached.
4. Install all components on to the DIN rail.
Table 1-4:
Mounting Parts
Aerotech P/N
DIN Rail
EAM00914
DIN Rail Clip Kit
HyperWire-DIN
Figure 1-10:
Din Rail Clip Dimensions
iXI4/XI4 Hardware Manual
1.2.3. DIN Rail Mounting
www.aerotech.com
27
