Aerotech Automation1 XI4-4P1, Hardware Manual

Page: 13 / 78

Installation Overview
The images that follow show the order in which to make connections and settings that are typical to
the iXI4/XI4. If a custom interconnect drawing was supplied with your system, that drawing is on your
Storage Device and shows as a line item on your Sales Order in the Integration section.
IMPORTANT : Standard and OEM connections are the same. Standard view shown.
Figure 1: Installation Connection Overview (iXI4 4-Axis Shown)
1 Connect the motor feedback and amplifier to the Axis Connectors. Section 2.2.
2 Connect the PC to the USB or Ethernet port. N/A
3 Connect the next drive in the system to the HyperWire Out port. Section 2.5.
4 Connect additional I/O as required by your application.
Section 2.3. /
Section 2.4.
5 Connect the power supply to the Control Supply. Section 2.1.1.
iXI4/XI4 Hardware Manual Installation Overview
www.aerotech.com 13