Aerotech Automation1 iXR3, Hardware Manual

Page: 61 / 112

2.4.4. Data Acquisition Inputs
The Data Acquisition ± input is used for the hardware Data Acquisition feature. The delay time
through the high-speed opto devices is 50 nsec (typical). The high-speed input is scaled for 5-24 VDC
input and can be used with sourcing or sinking drivers.
Table 2-26: Data Acquisition Input Pins on the PSO Connector
Pin # Description In/Out/Bi
1 Data Acqui Input
14 Data Acquisition - Input
Table 2-27: Data Acquisition Opto-Isolator Input Specifications
Specification (HCPL-0630) Value
Input Voltage 5-24 V
Input Current 10 mA
Figure 2-31: Data Acquisition Input Schematic
iXR3/XR3 Hardware Manual 2.4.4. Data Acquisition Inputs
www.aerotech.com 61