Aerotech Automation1 iXL2e, Hardware Manual

Page: 31 / 96

2.2.1.1. Brushless Motor Powered Motor and Feedback Phasing
Observe the state of the encoder and Hall-effect device signals in the Diagnostics section of the
Status Utility.
Table 2-8: Hall Signal Diagnostics
Hall-Signal Status Definition
-- 0 V or logic low
ON 5 V or logic high
Figure 2-4: Positive Motor Direction
Figure 2-5: Encoder and Hall Signal Diagnostics
www.aerotech.com 31
iXL2e/XL2e Hardware Manual 2.2.1. Brushless Motor Connections