RN200 Mono Software User Manual
18
5
Installation Guide
Detailed RN200 installation process is shown in Figure 16.
Figure 16: RN200 Cable Connection
1.
Take the RN200 out of its packing box and place it on a flat and firm desktop.
2.
Connect the power cord to the RN200; then
plug the other end of the power cord into a
power outlet.
3.
Connect a LAN cable to the LAN port of the RN200. Connect the other end of the cable to
a router or network switch; then connect a LAN cable from the router or switch to the
control PC.
