40 Huntingwood Drive Huntingwood NSW 2148
Phone: (02) 8825 1999 Website:
INSTALLATION MANUAL
AEROFLOW PERFORMANCE
LS CHEV OIL PAN
WARNING!
BEFORE PROCEEDING WITH INSTALLATION PLEASE READ INSTRUCTIONS CAREFULLY. THIS PRODUCT REQUIRES
DETAILED KNOWLEDGE OF AUTOMOTIVE SYSTEMS. WE RECOMMEND THAT THIS INSTALLATION BE CARRIED
OUT BY A QUALIFIED AUTOMOTIVE TECHNICIAN.
INTRODUCTION
Congratulations on your purchase of Aeroflow Performance LS Chev oil pan. Aeroflow Performance products
cannot and will not be responsible for any damage, or other conditions resulting from misapplication of the
parts described herein. However, it is our intention to provide the best possible products for our customer,
products that perform properly and satisfy your expectations. Should you have any questions? Please call
technical support at +61 2 8825 1900 and have the product part number on hand when calling.
This product is designed to suit LS Chev engines. It is a fabricated rear sump oil pan designed to use in engine
conversions. Examples of these engine conversions include Holden WB-HQ, 1968-1972 Nova, 1965-1972
Chevelle and 1967-1969 Camaro. This oil pan can also be used in additional applications (please check
dimensions at the end of these instructions for clearance).
It holds 5.5 litres of engine oil and uses the standard stock block mounted dipstick.
This race oil pan will utilize a different oil filter setup from the factory OEM location. Due to certain engine
conversions there is limited space and hard to reach for the stock location oil filter. Included on the pan is two
male -10AN to run an external oil filter and/or oil cooler such as AF64-4112, AF64-2075 or AF64-2061. This will
need to be adapted to suit your application.
This race oil pan features a trap door setup to keep oil within the oil pick up area under any condition. The
OEM windage tray may be used with this pan or purchase separately the Aeroflow Performance windage tray
AF82-2020 for improved oil control in any application.
Aeroflow Performance makes an oil pick up to suit this race pan as the standard OEM will not work. This is sold
separately ( AF82-2405 )
Before final assembly, make sure all parts are thoroughly cleaned. This oil pan contains hinged trap door style
baffles, it is advisable to install the pan with the engine upright to insure no trap doors will be stuck open.
