Aeroflex ProLock 2201, Getting Started Manual, Page: 33 / 60

Chapter 2 Installation
Installing the software
2201 ProLock 13
The following additional steps need to be taken to connect the
instrument to a PC that is running Lector:
1 Place ProLock close to the PC that will control the instrument.
2 Use a USB cable to connect ProLock’s USB-B port (on the
rear) to a free USB port on the PC.
Alternatively, you can connect ProLock to the PC using a LAN
connection. Use a standard CAT-5 LAN cable to connect the
LAN plug on ProLock’s rear panel with a LAN wall outlet if
you are using a local area network. Or use the standard LAN
cable with LAN-to-USB adapter that is included in the deliv-
ered items to connect the ProLock to a PC directly.
Installing the software
1 Go to the Aeroflex website and access the Lector and
Scriptor software at
http://www.aeroflex.com/ats/products/product/
Communications_Test/Cellular_Parametric_Test/
7310_Lector_--and--_Scriptor_Family~737.html
2 Go to the Software Downloads area and select 7310 Lector
and Scriptor Software .
3 Follow the instructions on the screen to download the soft-
ware
4 After completion of the Lector and Scriptor installation, the
setup program asks if you wish to install the HASP USB driver.
If you want to run 7312 Lector Enhanced or 7315 Scriptor:
a Confirm HASP HL USB dongle driver installation.
If selected, the HASP device driver is started.
b Confirm the Welcome menu and the license agreement.
The HASP device driver is installed. Depending on the
dongle installed, you may now be able to use the 7311
Lector Basic, 7312 Lector Enhanced or 7315 Scriptor
features.