Thanks
for choosing
We hope that this is the start of a long and happy relationship that will enable you to use your bike
more often, for more adventures in an easier and more enjoyable way.
If you’re like us and tend to skip the instructions and just start putting it together. . . . . . we understand.
However if you would like some help getting set up, below are some important and handy tips and
tricks for installing your aeroe gear.
All you need to install any of our products is a standard 5mm allen key. Take a moment to familiarise
yourself with some of the jargon below shown on the
handle bar cradle
. The following steps will then
allow you to get setup quickly and easily so you can get out and start enjoying your new gear!
Tool required for install - ‘
5mm allen key
’
handlebar cradle ‘
feet
’
and ‘
straps
’
to connect
to handlebar
In built ‘
cradle
straps
’ for easy use.
‘
handle bar cradle
’
We love seeing and hearing about your
adventures around the world. . . . . . if you
want to reach out or still need installation
help - we would love to hear from you!
You can reach us at
or on facebook and
#aeroebikepack
or check out
aeroe.com
for more information.
Thanks again from the aeroe team!
image: nzcycling journal
