Page 25/79 – v2.9
4.7.3.3.
Division
This setting allows to divide frequency of Digital Input Signal
(Pulse In)
4.7.3.4.
Source
This setting allows to choose Digital Input Signal
(Pulse In)
source
•
In Direct position, the signal input is taken from SMA connector.
•
In Daisy position, the signal input is taken from another TOMBAK
module chained. (Multi-output configuration option).
Output Pulse
4.7.4.1.
Width
This setting allows to modify Digital Output Signal
(Pulse Out)
pulse
width
4.7.4.2.
Delay
This setting allows to modify Digital Output Signal
(Pulse Out)
delay
4.7.4.3.
Fine Delay
This special feature allows to fine adjust the Digital Output Signal
(Pulse
Out)
delay up to 10ps
•
In Auto mode, the board automatically adjust delay from Delay
Box value
•
In Manual mode, user can adjust manually delay with 10ps
resolution
Synchro Input
4.7.5.1.
Source
This button allows to select signal source to synchronize with PULSE IN
•
In INT position
,
signal source is selected from an internal frequency
generator. Value can be adjusted with Frequency box.
•
In EXT position, signal source is selected from external source (SYNC
EXT Input Signal). Frequency is shown in Frequency box.
Summary of Contents for TOMBAK
Page 19: ...Page 19 79 v2 9...
