SECTION 5. Engine operation details
5.8
Auxiliary channel
For using an additional smoker valve, it is possible to connect an AUX input patch cable to the H
ORNET
-III.
5.8.1
Using the auxiliary channel to replace the RC’s trimming
The auxiliary channel can be configured to replace the trimming using the GSU menu (see Section 4.5.2), e.g.
if the RC uses digital trimming.
•
ON
replaces the maximum trim setting.
•
OFF
replaces the minimum trim setting.
• Leave the RC’s trimming at maximum when using this switch function.
5.8.2
Smoker valve
Alternatively, the auxiliary channel can be used to operate a smoker valve. The valve will open if the measured
temperature exceeds 300
◦
C and close if the reported temperature is below.
The smoker valve can be manually operated via GSU for testing (see Section 4.5.5).
20
