
72
The unit will revert to Surface Mode after 2 minutes, unless the Advance (Front) button is
pressed to access the Log Mode.
Two hours after the last dive
, the Time to Fly and Desaturation countdowns will be displayed al-
ternately for 3 seconds each until they Both count down to 0:00 or another dive is made. Access
to other modes is gained by pressing Either button to return to Surface Mode.
After a surface interval of 12 hours, you may choose to Fly (or travel to higher elevations),
provided that your dive profile(s) did not enter Decompression. If your diving involved de-
compression or a repetitive, multi day profile, it is strongly recommended that you wait a
full 24 hours after your last dive to add a greater degree of protection.
As you should be aware from your own training, the longer you wait to Fly (or travel to
higher elevations) after diving, the more you will reduce your exposure to decompression
sickness.
LOG MODE
Information from your latest 24 dives is stored in the
Log
for viewing. The first dive of a new
Activation Period will be #1, then #2, etc.
After 24 dives are accumulated, each subsequent dive will overwrite the oldest dive in the Log
(i.e., the most recent dive deletes the oldest). Log information will not be lost when the battery is
removed, but factory service will delete data.