23
SURFACE MODE
Surface Mode, identified by the Surface Time icon (Fig. 14a), fol-
lows Diagnostic Mode after Activation. Information includes
Dive Number '0' (no dive made yet), Surface Time (with flashing
colon), Temperature (and icon), Time of Day (with icon), the Bat-
tery Indicator, and Tank Pressure.
NOTE: If the wet contacts are bridged, the graphic
'H2O' will appear in place of the dive number '0'
(Fig. 15). After the unit is rinsed and dried, 'O' will
replace 'H2O'.
WARNING: If a Low Battery condition is displayed
after diagnostics (icon flashing), DO NOT dive with
the ATMOS ai until the Battery is changed.
While in the Surface Mode you can access various other Modes
that are described in detail throughout this manual.
Press the Advance (Front) button to access a sequence that in-
cludes Plan, Fly, DeSaturate, and Log Modes .
Press the Select (Bottom) button to activate the Backlight.
Press Both buttons (simultaneously) to access Set and Simula-
tor Modes.
Fig. 14 - Surface Mode
Fig. 15 - Surface Mode
(rinse and dry the unit)
a
