manualshive.com logo in svg

Aeris ATMOS 2, Operating Manual

Share
Download
Aeris ATMOS 2 Operating Manual Download Page 27

27

TO SET - ELAPSED DIVE TIME ALARM

(while in the Surface Mode)

Factory set for 0:00 hr:min, the Alarm can be set to values between

0:10 and 3:00 hr:min in increments of 0:05 hr:min.

•  Press Both buttons simultaneously, release when 

SET: 1

 ap-

pears.

•  Press and release  the Advance (Front) button, 

FO2

 appears

with the value flashing.

•  Press the Advance (Front) button 

2 more times.

•  The graphic 

EdT

, and Alarm and Dive Time icons appear with

the 

Elapsed Dive Time 

value flashing (Fig. 23).

•  Press and release the Select (Side) button until the desired

Alarm value appears, or press and hold the button to scroll

through the Set Points.

•  Press the Advance (Front) button to accept the setting and ad-

vance to PC Interface, or press and hold Both buttons for 2 sec-

onds to revert to Surface Mode.

•  Unit reverts to Surface Mode in 2 minutes if no button is

pressed.

Fig. 23 - Set Elapsed Time Alarm

Summary of Contents for ATMOS 2

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands