Instruction Manual
( WIRELESSBAND 2.F)
1. GENERAL
2. TRANSMITTER AND RECEIVER TERMINAL CONNECTIONS
3. TYPICAL CONFIGURATION FOR Optical Low Power Safety Edge (TRANSMITTER)
1 2 3
4 5 6
INPUT 1
COM 1
INHIBITOR
COM 2
INPUT 2
VCC
1 2 3 4 5 6 7 8 9 10 11 12
VCC1
OUTPUT 1
VCC2
OUTPUT 2
TEST
RELAY 1
TEST RELAY 2 /
INHIBITOR
+/
~
-
/
~
12/24V
AC/DC
TRANSMITTER
RECEIVER
1 2 3
4 5 6
INPUT 1
COM 1
Inhibitor
COM 2
INPUT 2
VCC
GND / 0V
OUTPUT SIGNAL
Optical Low Power Safety Edge
WHITE
BROWN
GREEN
5 VDC
TRANSMITTER
GB
1 - 6
1
2
3
4
ON
5
Optical sensor power
supply from receiver (ON)
Optical sensor power
supply from receiver (OFF)
Inhibition active
in receiver (ON)
Receiver options configuration
for Optical Safety Edge
1
2
3
ON
+
See points 4.3 and 10.1 for
other transmitter connections.
4. CONFIGURATION TYPES FOR Optical Low Power Safety Edge INHIBITION
WARNING!!
Desired Transmitter and receiver options must be set before the transmitter code memorization, otherwise system will not
work correctly. If there is some doubt about configuration is recomended to do a memory reset.
Examples:
- If you want to use transmitter inhibitor TX OPTION 2 and RX OPTION 5 must be OFF before the transmitter code memorization.
If used an Optical Safety Edge, we recommend that use the inhibitor for
extend the batteries life. Otherwise, the estimated life is about 6 months.
If you want to use receiver inhibitor TX OPTION 2 and RX OPTION 5 must be ON before the transmitter code memorization.
-
- Two channels wireless system communication, for the optical safety edge communication. For example, the pedestrian door contact to
control unit. The system has a long battery life (more than 4 years) working with a resistive or mechanical safety edge.
Translation of the original instructions
1.1 SAFETY INSTRUCTIONS
- Reaction time < 60ms
- A Relay test must be done before any operation to fulfill EN13849-1 Cat2 PL-C.
- Device with SELV/PELV Power Supply
(according TÜV test report AV86368T Certificate nº M6A 14 12 90800 001)
TÜV Certificate nºM6A 14 12 90800 001
WIRELESSBAND 2.F
RoHS
0
6
/0
2
/1
5
