Aeotec Smart Switch 7 ZWA023, User Manual

Page: 1 / 12

RGB LED
Action
Button
Intertek
5015320
Conforms to
UL STD. 62368-1
Certified to CSA
STD. C22.2
No. 62368-1
Smart Switch 7
Model: ZWA023-A
(908.42MHz)
Input / Output: 120V~,
60Hz, Max: 15A
FCC ID: 2AOGIZWA023
Assembled in China
PIN: 12345
Note: QR Code used for
SmartStart inclusion. DSK
Code can be found on
packaging. Do not remove
or damage them.
Important safety information.
Please re
ad this and the online guide(s) at
support.aeotec.com/ss7 carefully. Failure to follow the
recommendations set forth by Aeotec Limited may be
dangerous or cause a violation of the law. The
manufacturer, importer, distributor, and / or reseller will
not be held responsible for any loss or damage
resulting from not following any instructions in this
guide or in other materials.
Smart Switch 7 is intended for indoor use in dry
locations only. Do not use in damp, moist, and / or wet
locations.
Quick start.
The
following will step you through installing Smart
Switch 7 and connecting it to your Z-Wave
TM
network.
1. Plug Smart Switch 7 into a power outlet; its LED will
flash blue slowly.
2. To connect Smart Switch 7 to your automation
network:
a. If your Z-Wave gateway supports SmartStart,
scan Smart Switch 7's QR Code using your
gateway's app. Once scanned, Smart Switch 7
will join your Z-Wave network automatically
within 10 minutes.
b. Else, set your gateway into its 'add device'
mode. Refer to its manual if you are unsure of
how to perform this step.
Then press Smart Switch 7's Action Button 2x
times within 1 second; its LED will blink to
indicate pair mode.
c. If your gateway supports S2 security, and you
want your device to use this higher level of
security, please enter the first 5 digits of the
DSK into the gateway's interface when
prompted. Refer to the gateway’s manual if you
are unsure how to perform this step. Do not lose
the DSK or remove it from the product or
package.
3. When Smart Switch 7 successfully joins your
Z-Wave network, its LED will become a solid blue
for 2 seconds. Should its LED still flash blue, this
indicates it was unable to join your Z-Wave
network; repeat the above steps and please
contact us for further support if needed.
Smart Switch 7 is now a part of your Z-Wave home
control system. You can configure it and its
automations via your Z-Wave system; please refer to
your software’s user guide for precise instructions.
Get help & learn more.
Should you encounter any problem with Smart Switch
7, visit support.aeotec.com/ss7 or contact our support
team via aeotec.com/contact. You can also learn more
about Smart Switch 7 features, configuration options,
and technical specifications at the link.
Gateway compatibility.
To see if this device is known to be compatible with
your Z-Wave gateway, please refer to
aeotec.com/z-wave-gateways.
Manufactured for the importer by Aeotec Limited (#704, Bright
Way Tower, 33 Mong Kok Rd, Mong Kok, Hong Kong)
contactable via aeotec.com/contact. Imported into the
European Union by Aeotec Group GmbH (Große
Johannisstraße 7, Hamburg 20457, Germany). The importer
and / or distributor of this device can both be reached
separately with the company from whom you have purchased
this device from responsible for warranty, technical support,
and compliance related queries.
Declaration of Conformity. Aeotec Limited declares that
ZWA023 is in compliance with the essential requirements and
other relevant provisions of RED 2014/53/EU, RoHS
2011/65/EU, IEC 62321:2008, EN 50581:2012 and ErP
Directive 2009/125/EC, No 1275/2008 AMENDMENT
801/2013. The full text of the declaration is available from
support.aeotec.com/ss7/doc
Specifications. Specifications. Z-Wave devices operate
between 868.40 & 926.3 MHz depending on local restrictions.
It uses up to -5.68dBm ERP of transmission power, enabling
wireless connectivity.
Full information on device specifications and certifications at
support.aeotec.com/ss7/specs
Disposal guidelines and WEEE. Aeotec devices may
contain batteries; remove when not in use. Do not dispose of
Used in this guide.
Smart Switch 7
ZWA023