Manual for the AENO
TM
handheld garment steamer
© ASBISc Enterprises PLC. All rights reserved
Document version: 1.0.2, aeno.com
Page
23
of
39
NOTE
Before connecting the device to the mains make sure that the rated voltage
indicated in the technical documentation corresponds to the electrical voltage
of the outlet.
6.
Plug the power cord into a power outlet. Set the
“On/Off” switch (6) to the “On”
position. The indicator light of the steam button (5) will start blinking red.
Figure 10
–
Switching on the device
7.
Wait about 40 seconds until steam begins to build. The steamer must stand
stably on a flat, horizontal surface. When the indicator light of the steam button
(5) turns solid red, the heating process is considered completed and steam can
be supplied.
