AENO
TM
Handheld Garment
Steamer Operation Manual
© ASBISc Enterprises PLC. All rights reserved
Document version: 1.0.6, aeno.com
Page
35
of
42
4.2 Warranty service procedure
If you discover a suspected fault or defect in the device, you should contact an
authorized service centre before the warranty period expires and provide the
following information:
1.
A device with an alleged fault or defect.
2.
Original document confirming the purchase.
In the absence of an authorized service center, the customer should contact the store
where the device was purchased.
Warranty service is not available for:
•
adjustment, cleaning and other care of the product as specified in this user
manual;
•
replacement of consumables (batteries, filters, light bulbs, dust bags, etc.) as
specified in this document.
4.3 Limitation of liability
Products with manufacturing defects are subject to warranty service during the
warranty period. In this case, the warranty period is extended by the duration of the
repair.
AENO
TM
products are not eligible for free warranty service if the following damages or
defects are found:
•
damage caused by force majeure, accidents, negligence, intentional or careless
actions (omissions) of the buyer or third parties;
•
damage caused by the effects of other objects, including but not limited to
exposure to moisture, dampness, extreme temperatures, or environmental
conditions (or if they change drastically), corrosion, oxidation, ingress of food or
liquid and exposure to chemicals, animals, insects, and their products of vital
activity;
•
if the device (accessories, components) has been opened (the seals are broken),
altered or repaired by anyone other than an authorized service centre, or with
unauthorized replacement parts;
•
defects or damage caused by improper use, misuse, including use contrary to
the operating instructions;
•
defects caused by normal wear and tear, including bags, cases, battery packs,
or user manuals;
