AENO
TM
Handheld Garment
Steamer Operation Manual
© ASBISc Enterprises PLC. All rights reserved
Document version: 1.0.6, aeno.com
Page
29
of
42
The blue standby indicator (7) flashes in standby mode. The steaming head of the
device starts to cool down.
Figure 17
–
Device control panel in standby mode
To exit standby mode, press the ON/OFF button again (6).
2.5 Auto shutdown function in case of overheating
The steamer is equipped with an automatic overheat shutoff function. If the
temperature of the device rises above a certain value, the automatic shutdown is
triggered, all indicators go out, and the steamer stops working. Unplug the device and
wait for the steaming head to cool down. After that you can continue to use the
steamer according to point 2.3 "Operating the device".
Availability of this function makes working with the device safer.
