AENO
TM
Handheld Garment
Steamer Operation Manual
Document version: 1.0.6, aeno.com
© ASBISc Enterprises PLC. All rights reserved
Page
8
of
42
19.
If the power cord is damaged, first de-energize the socket, then unplug the
device. The power cord should only be replaced by a service technician.
20.
Always remove the plug from the socket after use or before cleaning the device.
21.
Allow the device to cool completely (may take up to 1 hour) before cleaning or
storing it.
22.
Do not use strong chemicals or abrasive materials to clean the device.
23.
Use only nozzles or replacement parts recommended or supplied by ASBISc for
this model.
24.
If the device has fallen into the water, do not touch it under any circumstances
and unplug it immediately.
25.
Never use a device that has been in water. Have it checked by an authorized
service center.
26.
If you notice a malfunction, stop using the device immediately and contact the
service center.
27.
The device and its components should only be repaired by a service center
technician. Never try to repair the device yourself.
28.
Do not make any modifications to the device or accessories.
