AENO
TM
Handheld Garment
Steamer Operation Manual
© ASBISc Enterprises PLC. All rights reserved
Document version: 1.0.6, aeno.com
Page
7
of
42
ATTENTION!
Failure to follow the operating instructions in this manual may result in personal
injury or property damage. ASBIS shall not be held liable for any damages
resulting from failure to observe the device operating instructions.
1.
The device is designed for use in the home, offices and other similar
environments. Do not use it for industrial purposes.
2.
The device must be out of reach of children and animals.
3.
Do not leave the device near open flames, hot surfaces, or heating appliances.
4.
Before connecting the device to the power source, check that the rated voltage
indicated in the technical documentation corresponds to the electrical voltage
of the socket.
5.
Connect the power cord to a grounded socket and disconnect only with dry
hands. Do not use an extension cord.
6.
Fill the tank with clean, distilled water only, without the use of detergents.
7.
Before turning the device on, make sure that the water tank is correctly
installed and its hole is sealed with the plug.
8.
Do not remove the water tank during operation. Do not turn on the steamer if
the water tank is empty. This can cause damage to the device.
9.
During operation, the surface of the steaming head can get very hot. Handle
the device carefully to avoid burns. Do not touch the steaming head during
operation and for about an hour after use, until it has cooled down completely.
Make sure that children or animals do not touch the hot steaming head.
10.
Do not lean the hot steaming head against furniture or other interior elements
to avoid damaging them.
11.
Before using the device, make sure that the fabric to be flattened is resistant to
high steam
temperatures (at least 160 °C). Check the care information on the
label.
12.
Never steam clothes on yourself, other people or animals.
13.
The device is designed for use on fabric. Do not use the device on other surfaces
such as glass, metal, or wood.
14.
Never point the steam jet at people, animals, plants, electrical appliances,
explosive, corrosive or toxic substances
.
15.
Place the power cord so that it cannot be accidentally stepped on or stumbled
through.
16.
Do not place the power cord on anything with a sharp edge and do not place
anything on top of the cord.
17.
Make sure that the power cord does not hang over the edge of furniture or
touch surfaces that can damage the insulation.
18.
Do not wrap the power cord around the device.
