RMS Clamp-on Simple Logger® Model CL600
5
2.1 Indicators and Buttons
The Simple Logger
®
has one button and one indicator. Both are located
on the front panel. The PRESS button is used to start and stop recordings,
turn the logger on and off and to delete data.
The Red LED indicates the status of the logger:
•
Single Blink:
STAND-BY mode
•
Double Blink:
RECORD mode
•
Continuously On:
OVERLOAD condition
•
No Blinks:
OFF mode
Warning - Delete Data:
Pressing the PRESS button for more than
5 seconds will turn the instrument OFF and delete the stored data.
2.2 Inputs and Outputs
Input to the logger is via a split jaw CT. The bottom of the logger has a
female 9-pin “D” shell serial connector used for data transmission from the
logger to your computer.
