Clamp-on Multimeter Model F03
9
2.6.3 DISPLAYING THE INTERNAL SOFTWARE VERSION
While pressing down the
HOLD
button, bring the rotary switch
from the
OFF
position to the
A
position.
The unit beeps, the software version is displayed in the form
UX.XX for 2 seconds, then all the segments of the display are
shown.
2.7
Yellow Button Primary Functions
2.7.1 MANUAL SELECTION OF AC/DC MODE
By default, the clamp switches to AC or DC mode automatically
(AC/DC symbol flashes) for the A and V functions. When the mode
is manually selected, the AC/DC symbol is fixed.
Use a series of short presses on the
yellow button
to manually
select AC/DC measurement, and to return to automatic mode.
NOTE:
Manual selection is not possible in MIN/MAX or HOLD
mode.
2.7.2 POSSIBLE SELECTIONS IN CONTINUITY FUNCTION
By default, the clamp is in the continuity function ( ).
To select resistance measurement (
Ω
), semi-conductor test func
-
tion (
), and to return to the continuity function ( ),
perform a
series of short presses on the yellow button
.
2.7.3 SETTING (°C / °F) WHEN MEASURING TEMPERATURE
Short-press the
yellow button
to select °C or °F. The selection
made will not be saved when the clamp is turned off.
2.8
Yellow Button Secondary Functions
(with rotary switch)
2.8.1 MODIFICATION OF AUDIO INDICATION THRESHOLD IN
CONTINUITY TEST
While pressing down the
yellow button
, bring the rotary switch
from the
OFF
position to the position.
The unit beeps, the
Ω
and
symbols appear, along with the
threshold value (40.0 by default)
.
Summary of Contents for F03
Page 1: ...F03 E N G L I S H User Manual CLAMP ON MULTIMETER...
Page 29: ...NOTES...
Page 30: ......
Page 31: ......