AEMC 603, User Manual

Page: 36 / 44

4.2.11 Adapter Function Measurement
4.2.11.1 In DC mode
Measurement Range (1) 0.0 to 999.9mV 1.00 to 9.99V
Specified Measurement Range (2) 0 to 100% of the measurement range
Accuracy 1% R +3cts
Resolution 0.1mV 10mV
Input Impedance
10M Ω
4.2.11.2 In AC mode
Measurement Range (1) 5.0 to 999.9mV 1.00 to 9.99V
Specified Measurement
Range (2)
1 to 100% of the
measurement range
0 to 100% of the
measurement range
Accuracy
5.0 to 99.9mV
± (1% R + 10cts)
100.0 to 999.9mV
± (1% R +3cts)
1% R +3cts
Resolution 0.1mV 10mV
Input Impedance
10M Ω
Note (1) The basic display is 10,000 counts. The position of the decimal count
and the display of multiples (m and k) depend on the programming of
the scale factor.
•
In DC, the display indicates "+OL" above +9999 counts and "-
OL" below -9999 counts. The "-" and "+" signs are managed
(polarity).
•
In AC, the display indicates "OL" above 9999 counts.
Note (2) - The max. bandwidth is 1kHz.
Specific specifications in MAX/MIN mode (from 10Hz to 1kHz):
•
Accuracy: add 1% R to the values of the table above.
•
Capture of the extreme: approximately 100ms.
4.3 ENVIRONMENTAL CONDITIONS
Conditions Operating Storage
Temperature -4° to +131°F
(-20° to +55°C)
-40° to +158°F
(-40° to +70°C)
Relative Humidity (RH) ≤90% up to 131°F (55°C) ≤90% up to 158°F (70°C)
36