1
Model OX5042 Handscope
Instructions for General Electrical
Measurements
First-Time Setup
1. Turn the instrument ON.
2. Press
Scope Mode
.
3. Press
Channel A
. The main menu appears as follows at the bottom of the
screen (default settings):
4. Press
Channel B
.
5. Press the right navigation key
until the Multiplier field is highlighted. By
default this is set to
x1
.
6. Press the down navigation key
until the
x1000
setting is highlighted.
7. Press
Enter
to save the setting.
8. Press to highlight the Units field.
9. Press
to highlight the
A
setting.
10. Press
to save the setting. The main menu now appears as follows:
NOTE:
These settings will remain in effect (even if the instrument batteries are
drained or removed) until changed by the user.
11.
Apply the voltage to be measured to Channel A and current to Channel B.
12.
Press the Auto Set
button to properly scale the measurements.
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
