6
D. Then insert the outlet end of the intake tube
into the silicone hose at the throttle body.
C. Carefully install your new AEM Cold Air Intake
tube (A) by first inserting the inlet into the fender
well access hole and aligning the bracket mount to
the insulated M6 mounting stud as shown.
A. Install two #48 hose clamps (F) onto the silicone
hose (E), then install the hose over the throttle body
flange. Tighten the hose clamp over the throttle
body flange and leave the other clamp loose.
B. Install the insulated M6 mounting stud (B) into
the fender well and fully tighten by hand. Use the
M6 threaded hole to the left of the hole actually
used to mount the stock air box.
3. Installation of AEM Intake System
a. When installing the intake system, do not completely tighten the hose clamps or mounting hardware until
instructed to do so.
