MORE EXAMPLES OVERLEAF...
IMPORTANT
IR Systeme Technik™
INSTALLATION GUIDE
PLEASE REFER TO THIS INSTRUCTION SHEET PRIOR TO INSTALLATION
The
IR Systeme Technik™
is designed to emit remote control signals effectively at the source devices connected to your
DigiSender®
product.
This could be your Satellite or Cable receiver, VCR, DVD etc.
When installed correctly, this device will enable you to control your equip-
ment from your bedroom or other remote location.
Because everyone has their equipment set up differently, the Magic Eye comes included with a number of accessories. These enable the
IR
Systeme Technik™
to be installed in many different ways. Please choose the most appropriate installation for your equipment setup.
IMPORTANT: THE MAGIC EYE CABLE MUST BE CONNECTED TO THE ‘IR’ SOCKET ON YOUR DIGISENDER® TRANSMITTER.
Please refer to your
DigiSender®
manual for further information.
EXAMPLE #1
Stacked equipment under TV stand
EXAMPLE #2
Equipment stacked in a glass cabinet
IR Systeme Technik™
Magic Eye System &
Accessories
Using the accessories
Accessory #1
Extension base
Accessory #2
Round base
Magic Eye
Infra red emitter
Vertical
Mounting #2
Vertical
Mounting #1
The Magic Eye can be affixed to the underside of the TV stand using the
supplied sticky foam pad.
Please ensure that the glass eye faces the equipment you wish to control, for
example, your Satellite or Cable receiver.
The Magic Eye can be affixed directly to the inside of the glass door. When
closed the eye will be facing the source equipment.
Please ensure that the glass eye faces the equipment you wish to control, for
example, your Satellite or Cable receiver.
Vertically mount the eye using the accessory
#
1
ensuring the infra red LED faces the infra red
sensor on your equipment.
Affix to inside of
cabinet door using
the supplied sticky
foam pad.
150807-1
