CABLE GAUGE
CABLE GAUGE
CABLE GAUGE
CABLE GAUGE
CABLE GAUGE
CZ20050
USER’S GUIDE
APPLICATIONS
Installation
- Measure the length of a cable remaining on a spool or in a box prior
to pulling a new run.
Trouble Calls
- Identify the type of fault in a cable (short or open) and the location
by measuring the distance to the fault.
Moves, Adds and Changes
- Verify cable lengths are less than the maximum
100 meters allowed prior to connecting computers or network equipment.
Job Costing
- Measure
the actual length of cables being replaced or upgraded.
Cabling Management
- Identify a wire pair on a punchdown block by locating the
transmitted tone.
WARRANTY
Aegis Pty. Ltd. and Aegis Instruments NZ Ltd. (Aegis) warrants that the product shall be free from defects in parts or
workmanship for a period of 12 months from the date of purchase if used in accordance with the operating specifications.
THIS IS THE ONLY WARRANTY MADE BY Aegis AND IS EXPRESSLY MADE IN LIEU OF ALL OTHER
WARRANTIES EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Should any parts or workmanship prove defective, Aegis will repair or replace at Aegis’ option, at no cost to the Buyer
except for shipping costs from the Buyer’s location to Aegis. This is Buyer’s
SOLE AND EXCLUSIVE REMEDY
under this
Agreement.
This warranty does not apply to products which have been subject to neglect, accident or improper use, or to units
which have been altered or repaired by other than an authorized repair facility.
Return of Equipment (Australia) - To return a product to Aegis Pty. Ltd., first obtain a Return Authorization number from
our Customer Service by c61 3 8872 6666. The RA# must be clearly marked on the shipping label, or the package will not be
accepted by Aegis Pty. Ltd. See sample label below.
To: Aegis Pty. Ltd.
200 Rooks Road
Vermont, 3133 Australia
RA# XXXXXXXX
Return of Equipment (New Zealand) - To return a product to Aegis Instruments NZ Ltd., first obtain a Return Authorization
number from our Customer Service by c64 9 356 8293. The RA# must be clearly marked on the shipping label, or the
package will not be accepted by Aegis Instruments NZ Ltd. See sample label below.
To: Aegis Instruments NZ Ltd.
15 Fairfax Avenue
Penrose, Auckland, New Zealand
RA# XXXXXXXX
Copyright 2008 PDS Inc.. All rights reserved.
P/N 1005-0500-0003 Rev. B
