Aegis ATC-HZ5510C-LCN, Manual, Page: 23 / 59

23
RED/CYAN/MAGENTA/YELLOW/MOSAIC
POSITION-X 0~160
POSITION-Y 0~90
SIZE-X 1~80
SIZE-Y 1~45
MASK RESET PUSH
INITIAL
RETURN
MOTION MODE OFF/ON
AREA NO 1~4
AREA ENABLE OFF/ON
AREA SET
( 1)
OUTPUT SCAN FULL,
2)
OUTPUT SCAN CROP
)
POSITION-X 0~89 1) ( 79) 2)
POSITION-Y 0~69 1) (49) 2)
SIZE-X 0~90
1)
( 80)
2)
SIZE-Y 0~70 1) ( 50) 2)
RETURN
ALARM WINDOW OFF/ON
ALARM TEXT OFF/ON
ALARM BLOCK OFF/ON
SENSITIVITY 0~60
INITIAL
RETURN
PIP MODE OFF/ON
SIZE 1/4,1/9,1/16,1/25
POSITION-X 0~10
POSITION-Y 0~10
INITIAL
RETURN
ETC BINNING OFF/ON
DEFECT PIXEL DEFECT PIXEL OFF/ON/STATIC/
ON(FIXED)
STATIC PROCESS PRESS OK
RETURN
FLICKER DETECT OFF/ON
RETURN
INITIAL
RETURN
SYSTEM
(*)It is not
initialized by
"Factory default"
OUTPUT FORMAT
1080p25/30/50/60, 1080i50/60, 720p25/30/50/60
APPLY YES / NO
SERIAL CAM ID 0~255
BAUDRATE 2400/4800/9600/19200/38400/57600/115200
PARITY NONE/EVEN/ODD
PROTOCOL AUTO/VISCA/AFP
APPLY YES / NO
RETURN
COLOR ADJUST LINE-RED 0~10
LINE-GREEN 0~10
LINE-BLUE 0~10
COLOR AREA
RED/BLUE/GREEN/CYAN/MAGENTA/YELLOW
COLOR HUE 0~180
COLOR GAIN 0~64
SAVE PRESS OK
INITIAL
RETURN
TRIGGER&SCAN TRIGGER MODE OFF/NORMAL/VD SYNC/ASYNC
SENSOR SCAN FULL/CROP
OUTPUT SCAN FULL/CROP
APPLY YES/NO
STROBE SIGNAL CENTER SHIFT -127~128