Cleaning and Care
38
5.
Take hold of the door glass panels on their up-
per edge one after the other and take them out
of the guide by pulling them upwards.
Cleaning the door glass panels
Clean the door glass panels thoroughly with a solution of water and washing up liquid.
Then dry them carefully.
Putting the door glass panels back.
1.
From above insert the door glass panels one af-
ter the other into the door profile at the bot-
tom edge of the door at an angle and lower
them.
3
The two smaller panels first, then the larger
panel.
2.
Take hold of the door trim (B) at each side, posi-
tion it on the inside edge of the door and plug
the door trim (B) into the upper edge of the
door.