AEG TR838P4B, User Manual

Page: 15 / 36

6.6 acoustic signal
The acoustic signal sounds at the
following:
• cycle end
• start and end of crease guard phase
The acoustic signal is by default always
on. You can use this option to activate or
deactivate the sound.
acoustic signal option off:
3s 3s
3s
1. Turn the dryer on.
2. Select 1 of the available programs.
3. Touch and hold down Refresh button
by around 3 seconds.
The symbol appears on the display.
4. To activate the acoustic signal, touch
the above button again until the
symbol disappears.
6.7 Finish In
This option allows choosing
the time at which a
programme should
terminate. Once activated
the machine waits for the
right moment to begin the
drying process.
Finish In time is the sum of stand by time
and drying time.
To set the Finish In option:
1. Set the drying programme and
options.
2. Touch Finish In repeatedly until the
display shows the desired time within
the programme should end (e.g.
if the programme has to finish
within 12 hours.)
3. Touch the Start/Pause button. The
drum starts rotating to perform the
ProSense estimation, if foreseen in
the selected programme.
4. The appliance starts the countdown
to the end of the programme and the
programme will start at the right
moment for ending.
7. BEFORE FIRST USE
Rear drum locks are
removed automatically when
dryer is activated for the first
time. Possible to hear some
noise.
To unlock the rear drum locks:
1. Switch on the appliance.
2. Set any programme.
3. Press the Start/Pause button.
Drum starts to rotate. Rear drum locks
are automatically deactivated.
Before you use the appliance to dry
items:
• Clean the tumble dryer drum with a
moist cloth.
• Start a 1 hour programme with moist
laundry.
At the beginning of the
drying cycle (first 3-5 min)
there could be a slightly
higher sound level. This is
due to the compressor
starting up. This is normal
for compressor powered
appliances such as
refrigerators and freezers.
ENGLISH 15