Use a moist cloth to clean. Dry the
cleaned surfaces with a soft cloth.
CAUTION!
Do not use furniture
cleaning agents or cleaning
agents which can cause
corrosion.
10.6
Cleaning the airflow slots
Use a vacuum cleaner to remove fluff
from the airflow slots.
11.
TROUBLESHOOTING
Problem
1)
Possible cause
Remedy
The tumble dry-
er does not op-
erate.
The tumble dryer is not connected
to the mains supply.
Connect it to the mains socket.
Check the fuse in the fuse box (do-
mestic installation).
The door is open.
Close the door.
The On/Off button was not push-
ed.
Push the On/Off button.
The Inicio/Pausa button was not
touched.
Touch the Inicio/Pausa button.
The appliance is in standby mode. Push the On/Off button.
Unsatisfactory
drying result.
Incorrect programme selection.
Select a suitable programme.
2)
The filter is clogged.
Clean the filter.
3)
Nivel de Sec. option was set to
seco plancha/engomar .
4)
Change Nivel de Sec. option to a
higher level.
The load was too large.
Do not exceed the maximum load
size.
The airflow slots are clogged.
Clean the airflow slots at the bot-
tom of the appliance.
There is some dirt on the humidity
sensor in the drum.
Clean the front surface of the
drum.
The dryness level was not set to
the desired level.
Adjust the dryness level.
5)
The condenser is clogged.
Clean the condenser.
3)
The loading
door does not
close
The filter is not locked into posi-
tion.
Put the filter in the correct posi-
tion.
Laundry is trapped between the
door and the seal.
Remove trapped items and close
the door.
www.aeg.com
20
Summary of Contents for T7DBG841
Page 1: ...USER MANUAL EN User Manual Tumble Dryer T7DBG841 ...
Page 26: ...www aeg com 26 ...
Page 27: ...ENGLISH 27 ...
