the Coolmatic function to chill the
products more rapidly and to avoid
warming the other food which is already
in the refrigerator.
1.
Press the Mode until the
corresponding icon appears.
The Coolmatic indicator flashes.
2.
Press the OK to confirm.
The Coolmatic indicator is shown.
The Coolmatic function shuts off
automatically after approximately 6
hours.
To switch off the function before its
automatic end, repeat the procedure.
The function switches off by
selecting a different fridge
set temperature.
4.7
Holiday mode
This mode allows you to keep the
appliance closed and empty during a
long holiday period without the
formation of bad odours.
1.
Press the Mode until the
corresponding icon appears.
The Holiday indicator flashes. The
temperature indicator shows the set
temperature.
2.
Press the OK to confirm.
The Holiday indicator is shown.
This mode switches off after
selecting a different
temperature.
4.8
ChildLock function
Activate the ChildLock function to lock
the buttons from unintentional
operation.
1.
Press Mode until the corresponding
icon appears.
The ChildLock indicator flashes.
2.
Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function,
repeat the procedure until the ChildLock
indicator goes off.
4.9
DrinksChill function
The DrinksChill function is to be used to
set an acoustic alarm at the preferred
time, useful for example when a recipe
requires to cool down food products for
a certain period of time.
1.
Press Mode until the corresponding
icon appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2.
Press the Timer regulator to change
the Timer set value from 1 to 90
minutes.
3.
Press OK to confirm.
TheDrinksChill indicator is shown.
The Timer start to flash (min).
At the end of the countdown the
DrinksChill indicator flashes and an
audible alarm sounds. Press OK to switch
off the sound and terminate the function.
To switch off the function repeat the
procedure until the DrinksChill goes off.
It is possible to change the
time at any time during the
countdown and at the end
by pressing the Temperature
colder button and the
Temperature warmer button.
4.10
Door open alarm
If the door is left open for approximately
90 seconds, the acoustic alarm starts and
alarm indicator flashes.
The alarm stops after closing the door.
During the alarm, the acoustic signal can
be muted by pressing any button.
4.11
DYNAMICAIR function
To switch on the function:
1.
Press the Mode button until the
corresponding icon appears.
The DYNAMICAIR indicator flashes.
2.
Press the OK button to confirm.
The DYNAMICAIR indicator is shown.
To switch off the function repeat the
procedure until the DYNAMICAIR
indicator icon goes off.
ENGLISH
23
Summary of Contents for SKE81821DS
Page 63: ...DEUTSCH 63 ...