flashing the alarm icon and freezer
temperature indicators, and sounding of
buzzer.
Press any button.
The buzzer switches off.
The freezer temperature indicator shows
the highest temperature reached for a
few seconds, then displays the set
temperature again.
The alarm indicator
continues to flash until the
normal conditions are
restored.
4.14
Door open alarm
If the refrigerator door is left open for
approximately 5 minutes, the sound is on
and alarm indicator flashes.
The alarm stops after closing the door.
During the alarm, the sound can be
muted by pressing any button.
4.15
DYNAMICAIR function
To switch on the function:
1.
Press the Mode button until the
corresponding icon appears.
The DYNAMICAIR indicator flashes.
2.
Press the OK button to confirm.
The DYNAMICAIR indicator is shown.
To switch off the function repeat the
procedure until the DYNAMICAIR
indicator icon goes off.
If the function is activated
automatically the
DYNAMICAIR indicator is
not shown (refer to "Daily
use").
The activation of the
DYNAMICAIR function
increase the energy
consumption.
5.
DAILY USE
WARNING!
Refer to Safety chapters.
5.1
Cleaning the interior
Before using the appliance for the first
time, the interior and all internal
accessories should be washed with
lukewarm water and some neutral soap
to remove the typical smell of a brand-
new product, then dried thoroughly.
CAUTION!
Do not use detergents,
abrasive powders, chlorine
or oil-based cleaners as they
will damage the finish.
5.2
Positioning the door
shelves
To permit storage of food packages of
various sizes, the door shelves can be
placed at different heights.
1.
Gradually pull the shelf up until it
comes free.
2.
Reposition as required.
This model is equipped with a
variable storage box which can be
moved sideways.
www.aeg.com
10
