Operating Instructions
37
Detergent deposits are
building up in the de-
tergent dispenser
drawer.
Water tap is not fully turned
on.
Turn the water tap on fully.
Filter in the screw connec-
tion of the inlet hose at the
water tap or at the appliance
is blocked.
Turn off the water tap. Un-
screw the inlet hose from the
water tap and from the ap-
pliance. Clean the filters.
The rinse water is
cloudy.
The cause is probably a de-
tergent with a high silicate
content.
No negative impact on the
rinsing results, perhaps use a
liquid detergent.
No illumination when a
programme option
button is pressed.
The selected programme op-
tion cannot be combined
with the set programme.
Make another selection.
Only END is illuminated
on the control panel.
The washing machine is in
standby mode.
Press any button.
Only WASH TIME is il-
luminated on the con-
trol panel; a number
between 1 and 19 is
displayed in the WASH
TIME display.
The delay timer is running
and the washing machine is
in standby mode.
If you press any button the
standby mode will be can-
celled.
The programme
progress display flashes
constantly.
Programme protection is
switched on; the programme
selector has been moved
during the wash cycle.
Turn programme selector
back to original position (see
“Programme Protection”).
Problem
Possible Cause
Remedy